中國供應商網 https://tianyijidian6.gys.cn/?from=tui
阿里網 https://fjtyjd.1688.com/
天益官網 https://www.qztyjd3000.com/
天益網 http://www.ksyy888.com/
天益網 https://www.qzty-a.com/
天益網 https://www.qzty-b.com/
天益網 https://www.qztyjd.com/
聯系方式
業務1：0595-68253669 15980435576 QQ：846925263 miss陳
業務2：0595-68253686 13675922394 QQ： 719429127 miss
業務3：0595-68253688 13559025135 QQ： 278600490 miss蔣
業務4：0595-68253686 15759537289 QQ： 3001073079 miss郤
天益機電供應 ：壓力表開關 放大器 液壓配件 哈威 阿托斯 齒輪泵
力士樂REXROTH 代理商，合作伙伴，一級經銷商
過濾器 插裝閥 液壓閥 比例閥 力士樂 氣動元件 臺灣YUKEN 測壓接頭
哈威HAWE 代理商，合作伙伴，一級經銷商
葉片泵 傳感器 伺服電機 工業導軌滑塊 因特威 INTEVA rexroth 密封件
阿托斯ATOS 代理商，合作伙伴，一級經銷商
液壓泵 eaton vickers 液壓缸 液位計 壓力繼電器 上海立新 比例放大板
威格士vickers 代理商，合作伙伴，一級經銷商
減壓閥 液壓快換接頭 空濾器 工業膠管接頭 變頻器 液壓維修 液壓馬達
派克 Parker 代理商，合作伙伴，一級經銷商
aventics ATOS 氣缸 調節閥 流量控制閥 單向閥 油研液壓 parker 華德液壓
安沃馳 aventics 代理商，合作伙伴，一級經銷商
hydac 軸向柱塞泵 伺服驅動器 威格士 電磁換向閥
賀德克hydac 代理商，合作伙伴，一級經銷商
太陽SUN 代理商，合作伙伴，一級經銷商
力士樂REXROTH 代理商，合作伙伴，一級經銷商
哈威HAWE 代理商，合作伙伴，一級經銷商
阿托斯ATOS 代理商，合作伙伴，一級經銷商
威格士vickers 代理商，合作伙伴，一級經銷商
派克 Parker 代理商，合作伙伴，一級經銷商
安沃馳 aventics 代理商，合作伙伴，一級經銷商
賀德克hydac 代理商，合作伙伴，一級經銷商
太陽SUN 代理商，合作伙伴，一級經銷商
Tianyi Electromechanical supplies: Pressure gauge switches, amplifiers, hydraulic fittings, HAWE, ATOS, gear pumps.
Agent, partner, and first-level distributor of REXROTH
Filters, cartridge valves, hydraulic valves, proportional valves, REXROTH, pneumatic components, pressure measurement joints of YUKEN from Taiwan
Agent, partner, and first-level distributor of HAWE
Vane pumps, sensors, servo motors, industrial guide rail sliders, INTEVA, rexroth seals
Agent, partner, and first-level distributor of ATOS
Hydraulic pumps, eaton, vickers, hydraulic cylinders, level gauges, pressure relays, Shanghai Lixin, proportional amplifier boards
Agent, partner, and first-level distributor of vickers
Pressure reducing valves, hydraulic quick-change connectors, air filters, industrial hose connectors, frequency converters, hydraulic maintenance, hydraulic motors
Agent, partner, and first-level distributor of Parker
aventics, ATOS, cylinders, regulating valves, flow control valves, check valves, YUKEN Hydraulics, parker, Huade Hydraulics
Agent, partner, and first-level distributor of aventics
hydac, axial piston pumps, servo drivers, vickers, electromagnetic directional control valves
Agent, partner, and first-level distributor of hydac
Agent, partner, and first-level distributor of SUN
Agent, partner, and first-level distributor of REXROTH
Agent, partner, and first-level distributor of HAWE
Agent, partner, and first-level distributor of ATOS
Agent, partner, and first-level distributor of vickers
Agent, partner, and first-level distributor of Parker
Agent, partner, and first-level distributor of aventics
Agent, partner, and first-level distributor of hydac
Agent, partner, and first-level distributor of SUN
Parker（派克）的自動化產品種類豐富，以下是一些主要的類別：
運動控制產品：
伺服電機：具有多種系列，可滿足不同的應用需求。例如，MGV 高速伺服電機具有低慣性、動態加速度和高速能力等特點，適用于各種模擬和測試臺應用；P 系列經濟型伺服系統則具有較高的性價比，適用于一般的工業自動化場景。這些伺服電機能夠?qū)崿F(xiàn)精確的位置、速度和轉矩控制，為自動化設備提供精準的動力驅動。
步進電機：Parker 的步進電機也有多種型號可供選擇，具有精確的步距角和較高的分辨率，可在一些對精度要求不是特別高，但需要精確控制步數的場合使用，如小型自動化設備、打印機等。
直線電機：速度可達 10m/s，平均值 3m/s，精度可達到微米（亞微米級），具有比一般機械系統更強的加速能力和零背隙的直接驅動特點，有效行程可達 20mm - 60m。適用于需要高精度直線運動的場合，如數控機床、半導體制造設備等。
驅動器和控制器：能夠與電機等設備配合使用，實現對運動系統的精確控制。例如，PAC 多軸運動控制器具有高性能和高效率，支持高速 EtherCAT 通信，可實現多軸聯動控制；還有一些針對特定電機型號的專用驅動器，能夠更好地發揮電機的性能。
減速機：可以與電機配合使用，降低電機的輸出轉速，提高輸出轉矩，以滿足不同設備對轉速和轉矩的要求。Parker 的減速機具有高效、可靠、耐用等特點，廣泛應用于各種自動化生產線和機械設備中。
編碼器：用于測量電機的轉速、位置等信息，反饋給控制系統，以實現對電機的精確控制。Parker 的編碼器具有高精度、高分辨率、抗干擾能力強等優點，能夠?yàn)樽詣?dòng)化系統提供準確的位置和速度反饋信號。
流體控制產品：
比例閥：如比例換向閥、比例壓力閥等，能夠根據輸入的電信號連續地調節流體的流量、壓力等參數，實現對流體的精確控制。例如 D41FCE01FC1NB70 比例換向閥，采用閥芯 / 套筒設計，具有高精度的先導控制和靈敏的流量調節能力，適用于各種機械設備和自動控制系統。
換向閥：包括電磁換向閥、手動換向閥等，用于控制流體的流向，實現自動化系統中流體的切換和控制。
液壓泵：是液壓系統的動力源，Parker 的液壓泵具有高效、可靠、耐用等特點，能夠?yàn)樽詣?dòng)化設備提供穩定的液壓動力。例如柱塞泵、齒輪泵等不同類型的液壓泵，可滿足不同的流量和壓力需求。
液壓缸：將液壓能轉化為機械能，實現直線運動。Parker 的液壓缸具有結構緊湊、密封性能好、工作可靠等優點，廣泛應用于各種自動化設備和工程機械中。
氣動控制產品：
氣缸：有多種類型，如標準氣缸、無桿氣缸等。無桿氣缸 OSP-P 系列缸徑從 10 到 80mm，模塊化設計，最大行程可到 41m，是點對點操作、往復運動和簡單的移動 / 傳輸應用場合的理想選擇，具有高適應性且易安裝、免維護壽命長、配置靈活等優點。
氣動閥：包括電磁閥、氣控閥等，用于控制氣體的通斷和流向，實現氣動系統的自動化控制。
氣源處理元件：如空氣過濾器、減壓閥、油霧器等，用于對壓縮空氣進行凈化、減壓和潤滑等處理，保證氣動系統的正常運行。
自動化系統集成組件：
傳感器：Parker 提供各種類型的傳感器，如壓力傳感器、溫度傳感器、流量傳感器等，用于監測自動化系統中的各種參數，為控制系統提供實時的反饋信息。
儀器儀表：包括壓力表、流量計、液位計等，用于測量和顯示自動化系統中的各種物理量，方便操作人員對系統的運行狀態進行監控。
工業連接器：用于連接自動化系統中的各種電氣和信號線路，具有可靠的連接性能和良好的防護性能，能夠適應各種惡劣的工業環境。Parker（派克）的管件接頭產品具有多種類型和特點，以下是一些常見的：
卡套式接頭：
EO 接頭：上世紀 30 年代派克漢尼汾工程師開創，以小巧體積和高壓能力聞名。例如 EO-Plus 接頭，耐腐蝕性更佳、承壓能力更高，采用 EO-LUB 潤滑工藝使裝配力矩降低 25%，具有可靠的裝配操作、過擰緊保護功能，彈簧效應表現優異，無六價鉻鍍鋅表面處理且高度通用性。EO2 接頭采用彈性密封設計，可在高溫環境下使用，對于腐蝕性介質，可選擇 FKM 氟橡膠以實現無泄漏的連接。EO2-Form 是新一代的高壓成型管件產品，基于 EO2 彈性密封技術，采用冷成型工藝，連接剛度更高，預裝扭矩降低，相比傳統焊接接頭，加工更快速、便捷，抗震性能出色。
普通卡套式接頭：這種接頭裝配方便，能夠提供較好的連接強度和密封性，適用于多種流體傳輸系統，可多次拆卸和安裝。其卡套具有彈簧效應，能夠吸收系統中的振動和壓力脈沖，在一些振動工況下表現良好。
擴口式接頭：
通過將管子的端部擴口，然后與接頭的錐面配合，形成密封連接。這種接頭適用于薄壁管材的連接，安裝簡單，不需要特殊的工具。擴口式接頭具有良好的密封性和耐壓性能，常用于液壓系統、氣動系統等。
焊接式接頭：
需要將接頭與管子進行焊接，以實現連接。焊接式接頭的連接強度高，密封性好，適用于高溫、高壓、高腐蝕性等惡劣工況。但是，焊接過程需要專業的設備和技術，安裝和維護相對較復雜。
快速接頭：
是一種自動接頭裝置，采用派克公司特有的快速接頭技術，可以實現快速拆卸和安裝，在拆卸和安裝過程中可以有效控制和保護連接器，從而實現快速、可靠、安全的連接作業。具有提高工作效率、保護電路不受干擾、防水、防塵、耐高溫、抗老化等特性，能夠有效抵抗惡劣環境，延長使用壽命，廣泛應用于電子、電氣、機械、汽車等行業，可以用于通訊、電源、信號等電路的連接，也可用于多種管道以及機械設備的潤滑油管路連接等。
管螺紋接頭：
提供多種螺紋類型，包括 NPT、NPTF、NPSM、BSPT、BSPP、SAE O 型環凸臺（ORB）、ISO 6149 和公制等。這種接頭尺寸緊湊，效率高，耐高溫，直螺紋接頭具有無限重復使用性，彈性密封，安裝時無需螺紋密封劑。鋼制配件的防腐性能出色，大大超過了 SAE 72 小時無紅銹的腐蝕要求，工作壓力可達 7500psi，適用于液壓流體和氣體處理連接等場景。
面密封接頭（O 型圈面密封接頭）：
在接頭的接觸面處采用 O 型圈進行密封，能夠提供可靠的密封性能，防止流體泄漏。這種接頭適用于對密封要求較高的系統，如高壓液壓系統、航空航天領域等。
法蘭式接頭：
通常用于連接較大管徑的管道或設備，具有較高的連接強度和穩定性。法蘭式接頭可以承受較大的拉力、壓力和彎矩，適用于一些重型工業設備和大型管道系統。
總的來說，Parker（派克）的管件接頭產品種類豐富，能夠滿足不同行業、不同應用場景的需求，其產品具有高質量、高性能、高可靠性的特點
Parker's automation products are rich in variety. The following are some of the main categories:
Motion Control Products:
Servo Motors: There are multiple series to meet different application requirements. For example, the MGV high-speed servo motor has characteristics such as low inertia, dynamic acceleration, and high-speed capabilities, and is suitable for various simulation and test bench applications; the P series economic servo system has a high cost-performance ratio and is suitable for general industrial automation scenarios. These servo motors can achieve precise control of position, speed, and torque, providing accurate power drive for automated equipment.
Stepper Motors: Parker's stepper motors also have a variety of models to choose from. They have precise step angles and high resolution, and can be used in some occasions where the accuracy requirement is not particularly high but precise control of the number of steps is needed, such as small automated equipment, printers, etc.
Linear Motors: The speed can reach 10m/s, with an average of 3m/s, and the accuracy can reach the micrometer (sub-micrometer) level. They have a stronger acceleration ability than general mechanical systems and the characteristic of direct drive with zero backlash. The effective stroke can reach 20mm - 60m. They are suitable for occasions that require high-precision linear motion, such as numerically controlled machine tools, semiconductor manufacturing equipment, etc.
Drivers and Controllers: They can be used in conjunction with equipment such as motors to achieve precise control of the motion system. For example, the PAC multi-axis motion controller has high performance and efficiency, supports high-speed EtherCAT communication, and can achieve multi-axis coordinated control; there are also some dedicated drivers for specific motor models that can better utilize the performance of the motors.
Speed Reducers: They can be used in conjunction with motors to reduce the output speed of the motors and increase the output torque to meet the requirements of different equipment for speed and torque. Parker's speed reducers have the characteristics of high efficiency, reliability, and durability, and are widely used in various automated production lines and mechanical equipment.
Encoders: They are used to measure information such as the speed and position of the motor and feed it back to the control system to achieve precise control of the motor. Parker's encoders have the advantages of high precision, high resolution, and strong anti-interference ability, and can provide accurate position and speed feedback signals for the automation system.
Fluid Control Products:
Proportional Valves: Such as proportional directional control valves, proportional pressure valves, etc., they can continuously adjust parameters such as the flow rate and pressure of the fluid according to the input electrical signals to achieve precise control of the fluid. For example, the D41FCE01FC1NB70 proportional directional control valve adopts a spool/sleeve design, has high-precision pilot control and sensitive flow adjustment capabilities, and is suitable for various mechanical equipment and automatic control systems.
Directional Control Valves: Including electromagnetic directional control valves, manual directional control valves, etc., they are used to control the flow direction of the fluid to achieve the switching and control of the fluid in the automation system.
Hydraulic Pumps: They are the power source of the hydraulic system. Parker's hydraulic pumps have the characteristics of high efficiency, reliability, and durability, and can provide stable hydraulic power for automated equipment. For example, different types of hydraulic pumps such as piston pumps and gear pumps can meet different flow rate and pressure requirements.
Hydraulic Cylinders: They convert hydraulic energy into mechanical energy to achieve linear motion. Parker's hydraulic cylinders have the advantages of compact structure, good sealing performance, and reliable operation, and are widely used in various automated equipment and construction machinery.
Pneumatic Control Products:
Cylinders: There are various types, such as standard cylinders, rodless cylinders, etc. The OSP-P series rodless cylinders have a bore diameter ranging from 10 to 80mm, with a modular design. The maximum stroke can reach 41m. They are an ideal choice for point-to-point operation, reciprocating motion, and simple movement/transportation applications, and have the advantages of high adaptability, easy installation, long maintenance-free life, and flexible configuration.
Pneumatic Valves: Including solenoid valves, pneumatically controlled valves, etc., they are used to control the on-off and flow direction of the gas to achieve the automated control of the pneumatic system.
Air Source Treatment Components: Such as air filters, pressure reducing valves, oil mist lubricators, etc., they are used to purify, reduce pressure, and lubricate the compressed air to ensure the normal operation of the pneumatic system.
Automation System Integration Components:
Sensors: Parker provides various types of sensors, such as pressure sensors, temperature sensors, flow sensors, etc., which are used to monitor various parameters in the automation system and provide real-time feedback information for the control system.
Instruments and Meters: Including pressure gauges, flow meters, level gauges, etc., they are used to measure and display various physical quantities in the automation system, making it convenient for operators to monitor the operating status of the system.
Industrial Connectors: They are used to connect various electrical and signal lines in the automation system. They have reliable connection performance and good protection performance and can adapt to various harsh industrial environments.
Parker's pipe fittings and connectors have a variety of types and characteristics. The following are some common ones:
Compression Tube Fittings:
EO Fittings: Pioneered by Parker Hannifin engineers in the 1930s, they are famous for their small size and high-pressure capabilities. For example, the EO-Plus fittings have better corrosion resistance and higher pressure-bearing capacity. The EO-LUB lubrication process reduces the assembly torque by 25%. They have reliable assembly operation, over-tightening protection function, excellent spring effect, galvanized surface treatment without hexavalent chromium, and high versatility. The EO2 fittings adopt an elastic seal design and can be used in high-temperature environments. For corrosive media, FKM fluororubber can be selected to achieve a leak-free connection. The EO2-Form is a new generation of high-pressure formed pipe fittings products. Based on the EO2 elastic seal technology and using a cold forming process, it has higher connection stiffness and reduced pre-installation torque. Compared with traditional welded joints, it is faster and more convenient to process and has excellent seismic performance.
Ordinary Compression Tube Fittings: These fittings are easy to assemble, can provide good connection strength and sealing performance, are suitable for a variety of fluid transmission systems, and can be disassembled and installed multiple times. The ferrule has a spring effect and can absorb vibrations and pressure pulses in the system, performing well in some vibrating working conditions.
Flared Fittings:
By flaring the end of the tube and then matching it with the conical surface of the fitting, a sealed connection is formed. This type of fitting is suitable for the connection of thin-walled pipes, is simple to install, and does not require special tools. Flared fittings have good sealing and pressure resistance performance and are often used in hydraulic systems, pneumatic systems, etc.
Welded Fittings:
The fitting and the tube need to be welded to achieve the connection. Welded fittings have high connection strength and good sealing performance and are suitable for harsh working conditions such as high temperature, high pressure, and high corrosion. However, the welding process requires professional equipment and technology, and the installation and maintenance are relatively complex.
Quick Connectors:
They are an automatic connector device. Using Parker's unique quick connector technology, they can achieve quick disassembly and installation. During the disassembly and installation process, the connector can be effectively controlled and protected, thus achieving quick, reliable, and safe connection operations. They have the characteristics of improving work efficiency, protecting the circuit from interference, being waterproof, dustproof, resistant to high temperature, anti-aging, etc., can effectively resist harsh environments, and extend the service life. They are widely used in industries such as electronics, electricity, machinery, and automobiles, and can be used for the connection of circuits such as communication, power supply, and signals, as well as for the connection of various pipelines and lubricating oil pipelines of mechanical equipment.
Pipe Thread Fittings:
They provide a variety of thread types, including NPT, NPTF, NPSM, BSPT, BSPP, SAE O-ring boss (ORB), ISO 6149, and metric, etc. These fittings are compact in size, efficient, resistant to high temperature. The straight thread fittings have unlimited reusability, elastic sealing, and do not require thread sealant during installation. The anti-corrosion performance of steel fittings is excellent, greatly exceeding the SAE requirement of no red rust within 72 hours. The working pressure can reach 7500psi, and they are suitable for scenarios such as hydraulic fluid and gas handling connections.
Face Seal Fittings (O-ring Face Seal Fittings):
O-rings are used for sealing at the contact surface of the fitting, which can provide reliable sealing performance and prevent fluid leakage. This type of fitting is suitable for systems with high sealing requirements, such as high-pressure hydraulic systems, the aerospace field, etc.
Flange Fittings:
They are usually used to connect pipes or equipment with a relatively large diameter and have high connection strength and stability. Flange fittings can withstand large tensile forces, pressures, and bending moments and are suitable for some heavy industrial equipment and large pipeline systems.
In general, Parker's pipe fittings and connectors are rich in variety, can meet the needs of different industries and different application scenarios, and their products have the characteristics of high quality, high performance, and high reliability.
QQ客服
新浪微博